Solar Water Pumping System
Solar Pump Online
This Project products are mainly used in dry region for irrigation of agriculture,it can be used for drinking water and living water.The living condition could be much improved.It also can be used for fountains garden.
◊ Feature
1. Energy-saving and environment-protected green products: Compared with the traditional altermation current machine,the efficiency is improved 25% by the permanent magnetism,direct current,brushless,non-sensor motor.
2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.
3. High technique products adopting MPPT and DSP chip technique.
4. 100% copper wire, cold-rolled silicon steel sheet
5. Stainless steel 304 shaft , motor body, screw
6. Natural rubber of Sealing and rubber stator
Specifications 1.Ideal for fountain,water feature,pond filtration.
1. Solar Pumps is dry run protected.
2. Solar powered with battery.
• Typical applications include creating garden fountain, pumping water for garden water feature or waterfall and performing pond water filtration and aeration.
• The solar surface pump kit consists of a DC brushless dry run protected water solar pump system, a solar panel module and a backup battery.
• Solar energized, maintenace free, cost free and easy to install. it also provide you solar panal.
• Dry run protection prevents the pump from burning out when fountain or pool dries out.
• No failure-prone carbon brush or shaft seal so that a robust and long service life could be expected.
• Battery back up, runs perfectly on overcast day and in the night.
• Ceramic shaft, runs steadily and quietly.
• Designed and manufactured to have high power efficiency.
• Cost-effectiveness, competitive price
2hp 415v Ac Pump
Max Head = 25M
Max Flow = 450LPM
Panel = 240w (24v 150w x 16pcs)
MPPT Controller 415v
Outlet = 2.0” and Inlet = 2.0”
2hp 415v Ac Pump
Max Head = 22M
Max Flow = 600LPM
Panel = 240w (24v 150w x 16pcs)
MPPT Controller 415v
Outlet = 2.0” and Inlet = 2.0”
3hp 415v Ac Pump
Max Head = 34M
Max Flow = 450LPM
Panel = 3000w (24v 190 x 16pcs)
MPPT Controller 415v
Outlet = 2.0” and Inlet = 2.0”
3hp 415v Ac Pump
Max Head = 18.5M
Max Flow = 1200LPM
Panel = 3000w (24v 190 x 16pcs)
MPPT Controller 415v
Outlet = 3.0” and Inlet = 3.0”
3hp 415v Ac Pump
Max Head = 70M
Max Flow = 200LPM
Panel = 3000w (24v 190 x 16pcs)
MPPT Controller 415v
Outlet = 2.0” and Inlet = 2.0”